All Products

Genuine Shimano Deore XT SM-CRM85 28-tooth direct-mount chainring for compatible M8100-series 1x12 mountain-bike cranksets. Shimano DYNAMIC CHAIN ENGAGEMENT+ tooth profiling helps retain the chain and supports smooth pedalling with a compatible Shimano 12-speed HG+ chain.Brand: Shimano Deore ..

Genuine Shimano 30-tooth middle chainring for the FC-M4000 Alivio 9-speed triple chainset. Replace a worn or damaged original ring while retaining the correct tooth count and fit.Brand: Shimano 30 teeth; middle chainring position For FC-M4000 Alivio 9-speed triple chainsets Manufacturer..

This black Shimano FC-MT210-B2 two-piece mountain bike chainset has 170 mm crank arms and 36 and 22 tooth chainrings for a 2 × 9-speed drivetrain. Its 51.8 mm chainline identifies the B2 variant. Check the required chainline for your frame before ordering...

This Shimano FC-RS510 two-piece road chainset pairs 172.5 mm crank arms with 52 and 36 tooth chainrings for an 11-speed double drivetrain. Madison lists this version for 135 mm and 142 mm rear spacing...

Genuine Shimano Nexus FC-NX75 city-bike chainset with a 33-tooth chainring and 170 mm silver crank arms. This is the single-ring square-taper version. Check your bottom bracket and chainline for the correct fit...

Genuine Shimano Bell Crank 3 unit for compatible Nexus Inter-3 internal gear hubs. Match the hub model and existing bell crank to the Shimano service diagram before ordering...

Right-hand twist shifter for a compatible Shimano Nexus 3-speed internal gear hub. This short-grip version has a numbered optical gear display. Check your existing shifter and hub before ordering...

Right-hand RevoShift for a compatible Shimano Nexus Inter-8 internally geared hub. Check the hub and cassette-joint combination against Shimano’s compatibility table...

Left-hand Rapidfire Plus clamp-band shifter with optical gear display, for a compatible double front derailleur...

Right-hand eight-speed Rapidfire Plus shifter with a band clamp and optical gear display. Match the rear derailleur and number of cassette sprockets...

Low-band Shimano SLX front derailleur for a compatible 3×10 mountain-bike drivetrain. Match the low-clamp mounting position, cable route and chainring setup to your frame...

Genuine Shimano SLX front hydraulic brake assembly with a right-hand BL-M7100 lever, two-piston BR-M7100 post-mount caliper and 1000 mm hose. Uses Shimano mineral oil...