All Products

The #764 pilot is used when facing BB86/92 bottom bracket shells and reaming is not requiredUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter..

Genuine Park Tool replacement part..

Genuine Park Tool replacement part..

The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headsetThe 768 is used with the 690-XL facer and the 750 centering cone adapterFacing the head tube will improve the alignment of the bearingsThe 768 pilot fits the Park tool HTR-1 Head tube Reamer and Fa..

For use with the HTR-1 Head tube Reaming and Facing Set, the 769 extends the reaming depth of the 1", 1-1/8" and 1-1/4" Reaming Cutters to 27mmDesigned for head tubes using headsets with deep insertion cups like Chris King Steelset headsets..

Genuine Park Tool replacement part..

For use with the HTR-1 Head tube Reaming and Facing SetThe 788 reams the headtube to an internal diameter at 43.95mm to accept internal headset cups with 44.05mm-44.10mm outer diameter (1-1/8" ZS standard)..

For use with the HTR-1 Head tube Reaming and Facing SetThe 789 reams the headtube to an internal diameter at 55.95mm to accept internal headset cups with a 55.99-56.04mm outer diameter (1.5" ZS standard)..

Used with the 690-XXL facing cutter and 750 centering cone adapterFor tubes with 55.95-55.90mm internal diameters (Internal 1.5" inch ZS standard)..

The #791 is used to ream and face Press fit 30 bottom bracket shells to an ID of 45.94mmMust be used with the HTR-1 Head Tube Reaming and Facing Set, QK750 centreing cone adapter and QK690-XL Facing Cutter..

The #799 is a 47mm reamer for cutting the lower head tube on frames using an IS47 bearing assembly for a 1-1/4" integrated headsetThe reamer is used in conjunction with the HTR-1 or HTR-1B Head Tube Reaming and Facing Set, #690-XL Facing Cutter and 750.2 Oversized Centering Cone..