Shimano

EW-JC304 E-tube cable junction for internal EW-SD300 wire routingThe 4 port Junction is required for connection of several componnts into the system with EW-SD300 wiresTo be positioned neatly inside frame tubing when connectedCables sold separatelyReliable and secure water resistant connectors..

EW-RS910 cushions, pair is product number 2 in the attached imageGenuine Shimano replacement part..

EW-RS910 dummy wire is product number 5 in the attached imageGenuine Shimano replacement part..

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shiftsThis junction A is required to connect the shifters via E-tube wires to the down tube junction wireFor eit..

EW-RS910 end cap / cushions is product number 4 in the attached imageGenuine Shimano replacement part..

EW-RS910 frame holder and fixing bolts, pair is product number 6 in the attached imageGenuine Shimano replacement part..

EW-RS910 handle holder A and B is product number 1 in the attached imageGenuine Shimano replacement part..

EW-RS910 wire holder is product number 3 in the attached imageGenuine Shimano replacement part..

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shiftsE-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cabl..

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shiftsE-tube Di2 uses a fully removable individual cable system from the battery indicator junction box enabling..

EW-SS300 speed sensor unit with hex type fixing bolt Available in cable lengths 340, 540, 760 and 1400mm..

EW-SS300 speed sensor unit with torx type fixing bolt Available in cable length 540mm..