CeramicSpeed

The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings yo..

The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings yo..

The BB30 standard opened up design possibilities for frames. Adapting it for Shimano cranks takes a special machined aluminium threaded bottom bracket that threads into itself.Ours are finished with CeramicSpeed Bearings. You have two choices in terms of bearings. The first choice is our low drag, l..

BSA is another way of stating English threading; it comes from British Standard Cycle. English threading on road bikes mean a 68mm wide, 34mm inside diameter shell with reverse threading on the drive side. It’s the most common threaded standard employed today. This kit works with 24mm diameter thru-..

Riders with a BSA, T4530, T4730 Bottom Bracket, or if they have a PF4630 on an EVO386 frame, can utilize this kit to install a DUB crank.Crank Compatibility: SRAM DUBFrame/Cup:BB30.PF30.PF30a.BBright.EVO386.BSA.T45.T47-68mm.T47-86mm.In the box:2 bearing seals.2 bearing dust covers.4 x 1mm spacers.3 ..

Crank Compatibility: 30mmFrame/cup:PF4630 (PF30, PF30a, BBright, EVO386)T47-68mmBB30In the box:2 bearing seals.2 bearing dust covers.1 x O-ring.2 x 1mm spacers.2 x 0,5mm spacer.5ml CeramicSpeed All Round Grease...

Unique multifunction tool provides an easy and clever way to remove secure fitting integrated dust covers, as well as assisting in alignment and simple installation of bearing seals and/or dust cover reinstallation.Supports easy dust cover removal and installation of seals and dust covers.Integrated..

Riders with the new PF4130 design can use this kit to install a DUB crank. It is important to note that the inner race must be recessed roughly 2.8mm to provide clearance for the dust cover. this is the key change on the new PF4130 that began shipping in 2018. if the inner race (and seal) are flush ..

Crank Compatibility: 30mmFrame/cup:BSA30.T45 (Colnago).T47-86mm.In the box:2 bearing seals.2 bearing dust covers.1 x O-ring.2 x 1mm spacers.2 x 0,5mm spacer.5ml CeramicSpeed All Round Grease...

Side A: 16 Notch Ø44.0mm for BSA/ITA/BB30/T47X68 for Shimano/SRAM GXP/Campagnolo UTSide B: 12 Notch Ø46.5mm for BSA/ITA/T47X68 for 30mm/SRAM DUB, BB30 SRAM DUBMagnetic centre guide for 22.2, 24, 28, 29 and 30mm bearing bore.Stable engagement with cups for easy installation and extraction.Standard 3/..

Side A: 16 Notch Ø52.2mm for T47X86 for Shimano/SRAM GXP/ Campagnolo UT/30mm/SRAM DUBSide B: 16 Notch Ø53.0mm for T45 (Colnago Threadfit 82.5) Shimano/SRAM GXP/Campagnolo UT/30mm/SRAM DUBMagnetic centre guide for 22.2, 24, 28, 29 and 30mm bearing bore.Stable engagement with cups for easy installatio..

Crank Compatibility: SRAM DUBFrame/cup:ITAIn the box:2 bearing seals.2 bearing dust covers.4 x 1mm spacers.3 x 3mm spacer.5ml CeramicSpeed All Round Grease...