Park Tool
Brand: Park Tool
Model: QK647R
Right hand T47 Tap (47mm x 1.0)Made in the USA and covered by Park Tool's legendary limited lifetime warranty..
£334.00
Ex Tax:£334.00
Brand: Park Tool
Model: QK648L
Left hand threaded T47 Guide (47mm x 1.0)Made in the USA and covered by Park Tool's legendary limited lifetime warranty..
£75.00
Ex Tax:£75.00
Brand: Park Tool
Model: QK648R
Right hand threaded T47 Guide (47mm x 1.0)Made in the USA and covered by Park Tool's legendary limited lifetime warranty..
£75.00
Ex Tax:£75.00
Brand: Park Tool
Model: QK687
Used with the HTR-1 Head Tube Reaming and Facing Set, the #687 replaces the facing cutter when only the reaming function is needed for a head tube or press fit bottom bracket shellThe #687 stops the reaming at the prescribed depth without machining the outer surface57mm OD...
£31.00
Ex Tax:£31.00
Brand: Park Tool
Model: QK690
The 690 facing cutter has an outside diameter of approximately 45mmSuitable for 1", 1-1/8" and 1-1/4" head tubesThe 690 facer is designed to fit HTR-1 Head tube Reamer and Facer, BTS-1 bottom bracket Tap Set and BFS-1 bottom bracket Facing SetAlways use cutting fluid such as Park tool CF-2 when mach..
£130.00
Ex Tax:£130.00
Brand: Park Tool
Model: QK690-XL
Facing improves the alignment of bearings in the headsetThe 690-XL has an approximate diameter of 58mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsetsMust be used with the 768 pilot to ensure the frame is reamed and faced accurately..
£149.00
Ex Tax:£149.00
Brand: Park Tool
Model: QK690-XXL
Facing improves the alignment of bearings in the headset, giving a better fit for improved strength and durabilityThe 690-XXL has an approximate diameter of 65mm and is a larger version of the 690 and 690-XL facers for facing 1.5" head tubes with low profile Zero Stack type headsetsMust be used with..
£211.00
Ex Tax:£211.00