Park Tool

The #744 is used to ream BB86/92 bottom bracket shells to an inside diameter of 40.98mmUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter..

The 750.2 Centring cone adapter increases the size of the centering cone of the HTR-1 Head tube Reaming and Facing SetFits headtubes with an inside diameter of 38-60mmSeveral headset standards use large head tube inside diametersThe 750.2 will allow the HTR-1 to be used with the IS (intergrated head..

Part number 751.2, 30.1mm reamer is included with HTR-1For headset cups with 30.2mm outside diameter, common on 1"" steering column bikes..

The #752 is used to ream BB30 bottom bracket shells to an ID of 41.94mmMust be used with the HTR-1 Head Tube Reaming and Facing Set with a QK750 centering cone adapter..

1-1/8"" headtube reamer for use with the Park HTR-1 and HTR-1B headtube facing and reaming setGenuine Park Tool replacement part..

The 756S.2 Reaming Cutter is used to machine head tubes using IS41 or Cane Creek Standard headsets (41mm x 45°)Must be used with the 690-XL Oversized Facer (not included) or the 687 Reamer StopIncludes part #755 Spacer for deeper cuts on lower IS41 headsets..

The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adapter to ensure correct alignment1.9516" (49.57mm) diam..

The #764 pilot is used when facing BB86/92 bottom bracket shells and reaming is not requiredUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter..

Genuine Park Tool replacement part..

Genuine Park Tool replacement part..

The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headsetThe 768 is used with the 690-XL facer and the 750 centering cone adapterFacing the head tube will improve the alignment of the bearingsThe 768 pilot fits the Park tool HTR-1 Head tube Reamer and Fa..