Tools

Hub cone wrench 13 to 15mm x 14 to 16mm (set of two pieces)..

CD Pedal Spanner – 15mmCD Pedal Spanner – 15mm is a bicycle workshop tool intended for cycle servicing, maintenance or component installation.Product detailsBrand: CDCategory: General ToolsSize: 15mmSelect the correct tool for the intended service operation and component standard before use...

Unique multifunction tool provides an easy and clever way to remove secure fitting integrated dust covers, as well as assisting in alignment and simple installation of bearing seals and/or dust cover reinstallation.Supports easy dust cover removal and installation of seals and dust covers.Integrated..

Riders with a BSA, T4530, T4730 Bottom Bracket, or if they have a PF4630 on an EVO386 frame, can utilize this kit to install a DUB crank.Crank Compatibility: SRAM DUBFrame/Cup:BB30.PF30.PF30a.BBright.EVO386.BSA.T45.T47-68mm.T47-86mm.In the box:2 bearing seals.2 bearing dust covers.4 x 1mm spacers.3 ..

Easily loosen 8mm and 10mm crank bolts using controlled, mechanical leverage. Featuring the CeramicSpeed BB Tool hand-wheel with an internal bearing to provide a smooth and easy pressing action. Also available without the hand-wheel if you already have a CeramicSpeed BB press kit.The Tool includes t..

Side A: 16 Notch Ø44.0mm for BSA/ITA/BB30/T47X68 for Shimano/SRAM GXP/Campagnolo UTSide B: 12 Notch Ø46.5mm for BSA/ITA/T47X68 for 30mm/SRAM DUB, BB30 SRAM DUBMagnetic centre guide for 22.2, 24, 28, 29 and 30mm bearing bore.Stable engagement with cups for easy installation and extraction.Standard 3/..

Side A: 16 Notch Ø52.2mm for T47X86 for Shimano/SRAM GXP/ Campagnolo UT/30mm/SRAM DUBSide B: 16 Notch Ø53.0mm for T45 (Colnago Threadfit 82.5) Shimano/SRAM GXP/Campagnolo UT/30mm/SRAM DUBMagnetic centre guide for 22.2, 24, 28, 29 and 30mm bearing bore.Stable engagement with cups for easy installatio..

The CeramicSpeed Pressfit Hub End Cap Tool makes easy work removing pressed on end caps without risk of damage or scratching them. The dual ended black alloy clamping tool fits both 19mm and 21mm OD hub end caps. Clamp it on, and pull it off...