Transmissions

Run Shimano HollowTech-II cranks in your SRAM PressFit 30 BBShims are based on industry standard PF30 bottom bracket shellsEasy to install and machined for exact fitShims press fit directly into PF30 bearings (6806)You will need the 6806 bearings already installed into the BB shell to start this con..

Single speed conversion kit with 16 tooth cogMachined 6061 aluminium spacersZinc plated 16 tooth cogSpacers are black anodized to increase durability of finishKit includes: 2 x 9mm angled spacers to support the cog6 x 3mm spacers3 x 1mm spacers16 tooth cog and lockring..

Spacers to work with 24mm cranks (Shimano and Sram) in PF30, BB30, BBRight and 386 Evo bottom brackets..

Spacers to work with 24mm cranks (Shimano and Sram) in PF30, BB30, BBRight and 386 Evo bottom brackets..

Spacers to work with 30mm cranks in PF30, BB30, BBRight and 386 Evo bottom brackets..

Spacers to work with 30mm cranks in PF30, BB30, BBRight and 386 Evo bottom brackets..

This pack includes 46mm inside diameter cup spacers that fit between a bottom bracket cup and the frameSpacers are machined from 6061 aluminium and anodized blackCan be used with a Wheels Manufacturing GXP compatible bottom bracket, add cup spacers between the non-drive side cup and the frame will m..

Quality stainless steel washers required for pedal installation on carbon and other cranksProvides a better surface for clamping pedals onto cranksSome brands require these to prevent damage to the crank arm..

Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing Large Bearing Press..

Sealed bearing extractor for 22mm ID bearingsExtractor has 1/2 thru hole for use with our 1/2 threaded rod press handles..

Sealed bearing extractor for 24mm ID bearings..

Sealed bearing extractor for 25mm ID bearingsExtractor has 1/2 thru hole for use with our 1/2 threaded rod press handles..