Menu
Your Cart

Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet

Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
Praxis - BB M30 - BB RIGHT ROAD 79mm R-Collet
£78.00
Ex Tax: £78.00

Available Options

Product Description

This is the Praxis M30 Press Fit Bottom Bracket for installing a Praxis M30 crank into a BB Right frame.

Features

TECHNOLOGY

For M30 spindle based cranks only.
Forged & machined heat-treated 7075 T6 Aluminium.
30mm Drive bearing / 28mm Non-Drive bearing.

VIP NOTES

  • This BB cannot be used for MTB Cranks
  • 79mm Width x 46mm Diameter
  • This specific M30 BB has our collet design and requires a press tool/drift for installation along with a 2pk M30 Socket Tools or 2 M30 Wrench Tools

WARRANTY

Praxis Works warrants components to be free from defects in materials or workmanship for a period of 2 years after original purchase. However, there are limitations as nothing lasts forever so please read our

Warranty Page

Specification

For M30 spindle based cranks only.
Forged & machined heat-treated 7075 T6 Aluminium.
Steel cartridge bearings. "Ceramic" version contains ABEC 5 bearings.
30mm Drive bearing / 28mm Non-Drive bearing.
For BB Right Aluminium frames.
INSTRUCTIONS HERE

Brand: CeramicSpeed
The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along ..
£210.00
Ex Tax:£210.00
Brand: CeramicSpeed
The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along ..
£270.00
Ex Tax:£270.00
Brand: CeramicSpeed
The BB30 standard opened up design possibilities for frames. Adapting it for Shimano cranks takes a special machined aluminium threaded bottom bracket..
£295.00
Ex Tax:£295.00
Brand: BBB
Bottom bracket spacer set.Use to adjust chainline of remove side-play.Bracket axle diameter24mmWeight2g..
£19.00
Ex Tax:£19.00
Brand: Campagnolo
Please note: These are not compatible with the Campagnolo Super Record 13x WirelessThe Ekar bottom bracket is designed specifically for gravel and all..
£13.00
Ex Tax:£13.00
Brand: Campagnolo
A high quality Campagnolo square taper bottom bracket that runs on three sealed cartridge bearings; two on the drive side and one on the non-drive sid..
£50.00
Ex Tax:£50.00
Brand: Campagnolo
A lightweight hollow axle bottom bracket that runs on three sealed cartridge bearings, two on the drive side and one on the non-drive side. Italian qu..
£75.00
Ex Tax:£75.00
Brand: Campagnolo
Replacement bearing and seal kit for any of the Campagnolo Power-Torque bottom bracket cups. PACK CONTENTSPair of Power-Torque BearingsCAMPAGNOLO ..
£28.00
Ex Tax:£28.00
Brand: Campagnolo
These Power-Torque bottom bracket cups are for use with Campagnolo Power-Torque chainsets, where the single piece axle is attached to the right-hand a..
£27.00
Ex Tax:£27.00
Brand: Campagnolo
These Bottom Bracket cups are specifically designed for the Campagnolo Super Record Wireless 13x groupset.The new Super Record bottom bracket has been..
£32.00
Ex Tax:£32.00
Brand: Campagnolo
The new Campagnolo bottom bracket has been designed to minimise friction and transform every watt into pure speed. The Ultra Ceramic bearings with sil..
£150.00
Ex Tax:£150.00
Brand: Campagnolo
Replacement bearing kits for Campagnolo Ultra-Torque bottom brackets. These are supplied in three qualities:CULT (Ceramic Ultimate Level Technology)..
£36.00
Ex Tax:£36.00